★X-CAM A10-3H for GOPRO 3 Axis Gimbal

Product Code: 1306008022

Availability:In stock

$180.90

Parameters

  • Weight:  280g ( without GOPRO )
  • Stabilization frequency:  5200Hz
  • Input voltage:  7.4v ~ 16.8v ( 2S ~ 4S Lipo )
  • Tilt travel:  +-90 degree; Roll travel:  +-45 degree
  • YAW travel:  360 degrees unlimited rotation
  • AV ouput & Charging Module has been insided
  • Does not need any Auto Pilot System supporting
  • 3 Gyro sensors & 1 Position sensor inside
  • Supports automatic location function

The S-BUS output provides full functions, all function has been defined channel number:

  • Channel 1 : ROLL Control
  • Channel 2: Return to HOME
  • Channel 3: TILT Control
  • Channel 4: YAW Control
  • Channel 5: Mode switch

 

The recommend operation ways

 

1. Single person: Just connect PPM channel for switch HEAD FOLLOWING , HEAD LOCK and AUTO BACK TO HOME, does not need to connect S-BUS channel, One receiver can be used.

 

2. Two persons: Does not need to connect PPM channel, only S-BUS output channel provides full functions. But needs 2 receivers

 

  Notice: It does not need provide power to the receiver when you using two person mode, the A10-3H controller will provide the power to the receiver via the S-BUS.

Announcements                                                                                                                 

1.        Do not touch the gimbal during the initialization after turn on, Keep the gimbal in quietude

2.        Do not use BEC for the gimbal power, pls use 2~4S Lipo battery

3.        Strongly suggest using 12mm tube to mount the gimbal

4.        Make sure the center of gravity of the gimbal  is correct before using.